Great Plains 1006 Assembly Instructions - Manual

© Copyright 2004 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
151-118M
706/1006 No-Till Drill
Option Installation
• 706 End Wheel No-Till Drill
• 1006 End Wheel No-Till Drill
General Information
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
These instructions explain how to install the Small Grass
Seeds, Fertilizer and Native Grass Seeds options.
These instructions apply to:
133-251A 706-7 Seed to SGS in row
133-252A 706-7 Seed to SGS side del.
133-253A 706-7 1/2 & 8 Seed to SGS in row
133-254A 706-7 1/2 & 8 Seed to SGS side del.
133-255A 1006-7 Seed to SGS in row
133-256A 1006-7 Seed to SGS side del.
133-257A 1006-7 1/2 Seed to SGS in row
133-258A 1006-7 1/2 Seed to SGS side del.
133-259A 1006-8 Seed to SGS in row
133-260A 1006-8 Seed ti SGS side del.
133-261A 706-7 NG to SGS in row
133-262A 706-7 NG to SGS side del.
133-263A 706-7 1/2 & 8 NG to SGS in row
133-264A 706-7 1/2 & 8 NG to SGS side del.
133-265A 1006-7 NG to SGS in row
133-266A 1006-7 NG to SGS side del.
133-267A 1006-7 1/2 NG to SGS in row
133-268A 1006-7 1/2 NG to SGS side del.
133-269A 1006-8 NG to SGS in row
133-270A 1006-8 NG to SGS side del.
133-271A 706-7 Fert. to SGS in row
133-272A 706-7 Fert. to SGS side del.
133-273A 706-7 1/2 & 8 Fert. to SGS in row
133-274A 706-7 1/2 & 8 Fert. to SGS side del.
133-275A 1006-7 Fert. to SGS in row
133-276A 1006-7 Fert. to SGS side del.
133-277A 1006-7 1/2 Fert. to SGS in row
133-278A 1006-7 1/2 Fert. to SGS side del.
133-279A 1006-8 Fert. to SGS in row
133-280A 1006-8 Fert. to SGS side del.
142-920A 706-7 Seed to Fert.
142-921A 706-7 1/2 & 8 Seed to Fert.
142-922A 1006-7 Seed to Fert.
142-923A 1006-7 1/2 Seed to Fert.
142-924A 1006-8 Seed to Fert.
142-925A 706-7 Seed & SGS to Fert.
142-926A 706-7 1/2 & 8 Seed & SGS to Fert.
142-927A 1006-7 Seed & SGS to Fert.
142-928A 1006-7 1/2 Seed & SGS to Fert.
142-929A 1006-8 Seed & SGS to Fert.
8/2/2005
142-930A 706-7 Seed to Fert. & SGS
142-931A 706-7 1/2 & 8 Seed to Fert. & SGS
142-932A 1006-7 Seed to Fert. & SGS
142-933A 1006-7 1/2 Seed to Fert. & SGS
142-934A 1006-8 Seed to Fert. & SGS
202-546A 706-7 Seed to NG
202-547A 706-7 1/2 & 8 Seed to NG
202-548A 1006-7 Seed to NG
202-549A 1006-7 1/2 Seed to NG
202-550A 1006-8 Seed to NG
202-563A 706-7 Seed & SGS to NG
202-564A 706-7 1/2 & 8 Seed & SGS to NG
202-565A 1006-7 Seed & SGS to NG
202-566A 1006-7 1/2 Seed & SGS to NG
202-567A 1006-8 Seed & SGS to NG
202-569A 706-7 Seed to NG & SGS
202-570A 706-7 1/2 & 8 Seed to NG & SGS
202-571A 1006-7 Seed to NG & SGS
202-572A 1006-7 1/2 Seed to NG & SGS
202-573A 1006-8 Seed to NG & SGS
Manual Update
Refer to the 706/1006 No-Till Drill operator’s manual for de-
tailed information on safely operating, adjusting,
troubleshooting and maintaining the various options men-
tioned in this installation manual. Refer to the parts manual
for part identification. Refer to the seed rate book for setup,
calibration and seed rates.
150-285M Operator’s Manual
150-285P Parts Manual
150-285B Seed Rate Book
Before You Start
Pages 23 through 40 are a detailed listing of parts included
in the various option packages. Use these lists to inventory
parts received. Detailed illustrations of sprock configura-
tions for the various option packages are located on pages
17 through 22.
Tools Required
• Basic hand tools
Definitions
Right-hand and left-hand as used in this manual are deter-
mined by facing the direction the machine will travel while in
use unless otherwise stated.