Great Plains ADC1150 Operator Manual - Manual (Page 52)

50
Section 7 Options
ADC1150 Air Drill Cart 167-101M 6/15/05
Great Plains Mfg., Inc.
Section 7
Options
Seed-Flow Blockage Option
The Loup Electronics monitor can be outfitted with sen-
sors that monitor for plugging in the one-inch, secondary
hoses. The package includes programmable blockage
modules for each tower and flow sensors for each second-
ary seed hose. The blockage modules signal the monitor
when flow stops at a sensor. The monitor then sounds an
alarm and identifies the problem hose.
For information on using the monitor with the optional
blockage sensors, refer to Operating Instructions–Block-
age Option, “System Monitor,” page 42.
To order blockage sensors, contact your Great Plains
dealer.
Implement and Row Spacing Part Numbers
NTA3010, 7.5-Inch 168-260A
NTA3010. 10-Inch 168-261A
NTA3510, 7.5-Inch 168-256A
NTA3510, 10-Inch 168-257A
ADI334, 7-Inch 168-256A
ADI334, 10-Inch 168-257A
ADI334, 12-Inch 168-261A
ADI345, 7-Inch 168-267A
ADI345, 10-Inch 168-256A
ADI345, 12-Inch 168-260A
CTA4000, 6-Inch 168-318A
CTA4000, 7.5-Inch 168-319A
CTA4000, 10-Inch 168-320A
16457