Great Plains 3PYP Steering Kit - Manual (Page 4)

4 Great Plains Manufacturing, Inc. Front Page Part Lists 3PYP Steering
401-776M Front Page Part Lists 01/24/2011
Remove Old Center Steering Arm Weldment
Refer to Figure 5
6.
Remove the two cotter pins holding the two cylin-
der pins to the center steering arm weldment .
Save cotter pins for reuse.
401-348H ARM STEERING WELDMENT
805-096C PIN COTTER 1/8 X 1 3/4 PLT
805-239C PIN CLEVIS 1 X 3 5/16 HRD PLT
Null4:
Refer to Figure 5 and Figure 6
7.
Using
5 ⁄
8
in wrench remove two bolts from retainer
trunnion . Remove both cylinder pins and move
the right cylinder aside. The left cylinder remains
attached as is.
Save bolts, pins and trunnion for reuse.
802-062C HHCS 5/8-11X5 GR5
401-940D RETAINER TRUNION
810-635C CYL 3X8 TRUN
8. Take set screw and key out of center arm
steering weldment . Save for reuse.
Null4:
Figure 5
Center Steering Arm Weldment
31901
61
51
62 62
61
61
62 51
51
61
62
Null4:
Figure 6
Detach Right Side Cylinder
31892
55
59
63
62
57
58
59
62
61
61
U
D
F
B
L
R
59
55 62
63
59
55
63
58 57
51