Great Plains 107-137V Bearing User Manual
How to: insert bearing into opener blade flange, Instructions, Bearing flange

Great Plains Manufacturing, Inc.
© Copyright 2012
Printed 01/09/2012
401-811M
How To: Insert Bearing into Opener Blade Flange
Instructions:
These instructions explain how
to insert a bearing into a bear-
ing flange so no damage
results to the bearing.
CAUTION: Do not push on
the inner race of the bearing
only, doing so will damage
the bearing and it will need
to be replaced.
If there is bearing damage the
opener blade will not perform
correctly.
1.
Position the flange on a
flat surface on the bed of
a hydraulic or manual
press (as shown in Fig 1).
Note: There is an orientation
groove on the outside edge of
the bearing to indicate that end
faces out (as shown in Fig 1).
2.
Set the bearing in the
flange with the orientation
groove up (as shown in
Fig 1).
3.
Lay a heavy bar or plate
(
3
⁄
4
” to 1” thick) across the
bearing so it is pushing on
the inner race and outer
race of the bearing at the
same time.
4.
Operate the press to push
the bearing into the flange
until it is “seated” in the
flange.
Part#
Description
107-137V
Flange and Bearing Assy
Bearing
Flange
32496
Figure 1
- Heavy Reset Springs Kit (3 pages)
- Single Section Yield-Pro Implement PTO Pump System or Fan Update (82 pages)
- Flex Harrow Light Kit (2 pages)
- Planter Hopper Lid Latch Kit (4 pages)
- YP Drive Shaft Update Kit (3 pages)
- 30-Foot 3-Section Vintage Drill (28 pages)
- Uni-Press (20 pages)
- White Planters 6100 Planter Seed-Lok (17 pages)
- 1200TM (3 pages)
- PM400 Monitor Operator (60 pages)
- Raven 440 (60 pages)
- Verti-Till Ripper VT 03 Hyddepth Convert (5 pages)
- Native Grass Cup Enhancement Kit (7 pages)
- Raven G1 Autoboom Assy (2 pages)
- 8030-3P Wide Row Planters (28 pages)
- Terra-Tine Row Cleaner (31 pages)
- S3T (22 pages)
- Eliminator Kit (7 pages)
- Yield-Pro 1625 Planter 2004 (13 pages)
- Utility Coulter & Vantage I-20 Fertilizer Coulters (21 pages)
- Electric Clutch Package (108 pages)
- Seed-Lok (4 pages)
- Yield-Pro Planters Refuge Hopper Kit (6 pages)
- Yield-Pro Planter Manifold Air Release Kit (3 pages)
- EHPR Valve Calibration (6 pages)
- Full Press Drill Post Conversion (7 pages)
- Fertilizer Arm Kits (20 pages)
- PTO Kits 2-3-Section (100 pages)
- Hydraulic Depth Stop (4 pages)
- Seed Flap and Tube Kit 00 Series Openers (2 pages)
- Yield-Pro Unit-Mount Coulter (16 pages)
- Trash All Series Openers (2 pages)
- 705NG (8 pages)
- Inline Ripper Gauge Wheel Jack Kit (7 pages)
- DICKEY-john IntelliAg Planter-Drill Control L1 (37 pages)
- Auto Reset Bolt Retainer (3 pages)
- Universal Acre Meter (12 pages)
- Air-Pro Planters Actuator Field Kit (6 pages)
- CDS-JohnBlue NGP Series Pumps (24 pages)
- Yield-Pro Planter Seed Tube (6 pages)
- 1515 Marker Option (10 pages)
- Frame-Mounted Coulters (6 pages)
- Shank Holder Clamp Bolt Update (1 page)
- PD8070 (10 pages)
- YP Fertilizer Ground Drive Update (12 pages)