Great Plains 9756PP Operator Manual - Manual (Page 14)

580-043M 02/17/2014
10 9322-9756PP Great Plains Manufacturing, Inc.
Introduction
Great Plains welcomes you to our growing family of new
product owners. The Plains Plow has been designed
with care and built by skilled workers using quality mate-
rials. Proper setup, maintenance, and safe operating
practices will help you get years of satisfactory use from
the machine.
Models Covered
Description of Unit
The Plains Plow is a three, five or seven-section V-Blade
undercutting tillage tool. Working width ranges from 22 to
56 feet. The implement is designed to undercut, kill
weeds, apply fertilizers, break up hardpan, manage resi-
due for greater moisture retention and wind erosion pro-
tection.
Document Family
Using This Manual
This manual will familiarize you with
safety, assembly, operation, adjust-
ments, troubleshooting, and mainte-
nance. Read this manual and follow
the recommendations to help ensure safe and efficient
operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
A crucial point of information related to the preceding topic.
Read and follow the directions to remain safe, avoid serious
damage to equipment and ensure desired field results.
Note: Useful information related to the preceding topic.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
9322PP 22-Foot 3-section
9326PP 26-Foot 3-section
9533PP 33-Foot 5-section
9540PP 40-Foot 5-section
9744PP 44-Foot 7-section
9748PP 48-Foot 7-section
9752PP 52-Foot 7-section
9756PP 56-Foot 7-section
Figure 1
9744PP Plains Plow
43006
L
R
U
D
F
B
L
R
580-043Q Pre-Delivery Manual
580-043M Operator Manual (this document)
580-043P Parts Manual
U
D
F
B
L
R