Great Plains 8560 FCF Parts Manual - Manual (Page 73)

Revision Comments Part Description Part No. Ref.
Image No. dwg43242
SHANK 5/8X1 3/4X30 MIN DRAFT 820-296C 1.
SHANK 5/8X1 3/4X30 FLAT 820-295C 1.
7/16X1.5 ID TOP SPRING PLUG 552-030D 2.
SPRING EXT 2.42OD .438W 9.69LG 807-149C 3.
7/16X1.5 ID BOTTOM SPRING PLUG 812-143C 4.
Includes items 2 thru 4 HEAVY SPRING/PLUG SUB ASSY 552-057V 5.
SHANK CRADLE WITH BUSHINGS 552-161V 6.
SHANK UPRIGHT F/4" TUBE 552-006D 7.
SHANK BRACKET PIVOT TUBE 552-034D 8.
U-BOLT 5/8-11 X 4 1/3 X 4 806-161C 9.
NUT HEX TOP LOCK 5/8-11 PLT 803-271C 10.
HHCS 1/2-13X1 1/2 GR5 SPCL THD 802-507C 11.
RHSNB 3/4-10X4 1/8 GR5 SPTHD 802-485C 12.
NUT HEX JAM NYLOCK 3/4-10 PLT 803-126C 13.
HHCS 1/2-13X3 GR5 SPCL THD PLT 802-535C 14.
NUT HEX TOP LOCK 1/2 - 13 PLT 803-342C 15.
HHCS 5/8-11X2 GR5 802-055C 16.
Includes items 1-16 SHANK MIN DRFT SPRING HVY ASSY 552-156L 17.
SWEEP 10 HARDFACED 820-400C 18.
SWEEP 11 HARDFACED 820-401C 18.
SWEEP 10 REGULAR 820-404C 18.
SWEEP 11 REGULAR 820-405C 18.
PLOW 7/16-14X1 3/4 GR5 802-090C 19.
WASHER FLAT 7/16 USS PLT 804-204C 20.
NUT HEX NYLOCK 7/16-14 PLT 803-245C 21.
Includes items 18-21 SWEEP, 10" W/BOLTS 575-807V 22.
Includes items 18-21 10" SWEEP W/BOLTS, HARDFACED 575-767V 22.
Includes items 18-21 SWEEP, 11" W/BOLTS 575-808V 22.
Includes items 18-21 SWEEP, 11" W/BOLTS, HARDFACED 575-804V 22.
05/22/14 - 73 - 560-483P
Table of Contents Part Number Index
Section 5: Shanks
Magnum Shank Assembly (S/N GP-2265CC+)
(Applies to 8323FCC, 8328FCC, 8332FCC, 8336FCC, 8539FCC, 8544FCC, 8548FCC, 8551FCC, 8556FCC,
8560FCC only)