Great Plains 8560 FCF Parts Manual - Manual (Page 35)

Revision Comments Part Description Part No. Ref.
Image No. dwg41704
PIVOT SPINDLE 2 X 8 1/16 550-015D 1.
SEAL (CR16286) 816-398C 2.
SEAL SLEEVE (CR081071) 816-396C 3.
INNER CONE, JL69349 822-198C 4.
INNER CUP JL69310 822-197C 5.
WALKING BEAM 560-397H 6.
GREASE ZERK 1/4-28 THD FORMING 800-080C 7.
BEARING CUP LM-67010 822-020C 8.
BEARING CONE LM-67048 822-021C 9.
WASHER SPINDLE - 7/8 804-055C 10.
NUT HEX SLOTTED 7/8-14 PLT 803-029C 11.
PIN COTTER 5/32 X 1 1/2 LONG 805-089C 12.
GREASE CAP 2.448X1.12X.25 890-781C 13.
Purchased Complete. See Hub &
Spindle Assembly.
HUB 6-BOLT SPINDLE 2X13.5 890 815-221C 14.
PIN CLEVIS 5/16X2 13/16 USABLE 805-324C 15.
PIN COTTER 1/8 X 1 805-363C 16.
Items 1 thru 16 WING WALKING BEAM HUB ASSY 560-400L 17.
WHEEL 15X6 6 BOLT WHITE 814-220C 18.
TIRE 9.5 L X 15 8 PLY 814-011C 19.
Includes items 18 & 19 TIRE/WHEEL 9.5LX15 8 PLY WHITE 814-230C 20.
NUT LUG 9/16-18 X 90 PLT 803-061C 21.
Rev. 2 HHCS 5/16-18X4 GR8 PLT 802-802C 22.
Rev. 1 Replaced by 802-802C HHCS 5/16-18X3 1/2 GR8 802-882C 22.
NUT HEX TOP LOCK 5/16-18 PLT 803-166C 23.
05/22/14 - 35 - 560-483P
Table of Contents Part Number Index
Section 3: Transport
Wing Walking Beam Assembly
(Applies to 8323FCC, 8328FCC, 8332FCC, 8336FCC, 8539FCC, 8544FCC, 8548FCC, 8551FCC, 8556FCC,
8560FCC only)