Great Plains 8560 FCF Parts Manual - Manual (Page 45)

Revision Comments Part Description Part No. Ref.
Image No. dwg41709
AXLE SPINDLE 2 3/4X17 (Q60-8) 576-114D 1.
SEAL OIL CR27362 3.75X2.75X.44 816-220C 2.
BRG CONE 2.16ID JLM506849 822-110C 3.
BRG CUP 3.54OD JLM506810 822-109C 4.
HUB 608 W/CUPS 8-BOLTS 8 BC" 815-164C 5.
GREASE ZERK STRAIGHT 1/4-28 800-001C 6.
BRG CUP 2.89ODX.58WD #LM501310 822-053C 7.
BRG CONE 1.62IDX.78WD#LM501349 822-048C 8.
1 HARDENED SPINDLE WASHER 148-404D 9.
NUT HEX SLOTTED 1-14 803-095C 10.
PIN COTTER 3/16 X 1 3/4 PLT 805-017C 11.
GREASE CAP 3.125 X .38 890-277C 12.
HUB STUD 5/8-18X2 1/2 GR5 802-182C 13.
NUT LUG 5/8-18 X 90 DEG PLT 803-219C 14.
Includes items 1-14 HUB 8-BOLT SPINDLE 2.75X17 608 815-251C 15.
05/22/14 - 45 - 560-483P
Table of Contents Part Number Index
Section 3: Transport
815-251C Hub & Spindle Assembly
(Applies to 8551FCC, 8556FCC, 8560FCC only)