Control4 Wireless Thermostat User Manual
Page 15
15
Change Thermostat Hold Option using System Remote Control LCD
1
Press the Comfort button.
2
Press the Down or Up Arrow buttons to highlight Thermostat on the LCD screen, then press the Select
button to view the thermostat’s current settings.
3
Press the Down or Up Arrow buttons to highlight the Hold option and press the Select button to view the
hold options.
4
Press the Down or Up Arrow buttons to highlight a hold option: Off, On (Until next event), 2 Hours,
Permanent or Hold Cancel.
5
Press the Select button to apply the option you have highlighted.
6
Press the Left Arrow button to go back to view the previous screen to verify that the mode change is
implemented.
Change Thermostat Hold Option using LCD Keypad
1
From the Main LCD screen, select Comfort.
1
Turn the Select Dial to highlight Thermostat and press
the Select Dial to view the thermostat options.
2
Scroll down to the Hold option and press the Select Dial.
3
From the Hold options that appear, select one of the hold
options: Off, On (Until next event), 2 Hours, or
Permanent. The screen updates immediately to reflect
the change.