Great Plains Yield-Pro Planters Hopper Lid Seal Kit - Manual

Part Lists Great Plains Manufacturing, Inc. 1
© Copyright 2012 Printed 04/05/2012 Part Lists 403-618M
Yield-Pro
®
Planters Hopper Lid Seal Kit
General Information
These instructions explain how to install a Bin Lid Seal
and Latch Kit. One kit updates one planter hopper lid:
Tools Required
• isopropyl “rubbing” alcohol
• basic hand tools
• tape measure
• marking pen
• drill for making holes with drill bit sizes
9 ⁄
32
in
and
11 ⁄
32
in
Work Location
Move the implement to a flat location for installation.
Falling Hazard:
Practice caution when working on elevated surfaces. Some
update work may not be within reach from the walkboard. A
fall from a mounted hopper could result in serious injury or
death. Dismount the hopper to reduce the hazard. Make sure
any ladders used have solid footing, and are secured to the
planter or hopper.
Notations and Conventions Call-Outs
Null4:
Used with YP Planter with 82 or 150 bu hoppers:
• YP1225/1625
• YP1225A/1625A
Used with YP Planter with 82 bu hopper only:
• 3PYP and 3PYPA
When you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of oth-
ers depend on it!
Kit Kit Description
403-619A Bin Lid Seal and Latch Kit
Figure 1
Bin Lid Seal and Latch Kit
32479
U
D
F
B
R
L
Nul l4: “Left” and “Right” are facing in the
direction of machine travel. An orienta-
tion rose in the line art illustrations
shows the directions of Left, Right,
Front, Back, Up, Down.
U
D
L
R
B
F
to Single-digit callouts identify components in
the currently referenced Figure. These num-
bers may be reused for different items from
page to page.
to Two-digit callouts in the range 11 to 20 refer-
ence new parts from the list on page 4.
1 9
11 20
• YP3010/3020/3025
• YP3025A
• YP4010/4020/4025
• YP4025A
• YP2425 and YP2425A • YP1220