Great Plains Electronic Acremeter - Manual (Page 10)

Great Plains Mfg., Inc.
10 Electronic Acremeter
194-074M 2014/07/23
Changing the Passcode
To change an existing passcode, first enter the existing
password as described in ““Using a Passcode””.
Refer to Figure 10
While still in the P-WORD function display, select a new
passcode using the UP and DOWN buttons.
Press and hold the button until the “ SEt ” (setting
password) appears in the display. Release the button.
The number in the display is your new password. Be sure
to record it.
To disable the passcode, set the new password to 0000
(press and hold both UP and DOWN to do this quickly).
Press and hold the
button until “ dIS ” (passcode
disabled) appears in the display.
If the passcode is forgotten, it can be disabled by
removing the batteries. In rental or managed commercial
operations, it is recommended that a tamper-evident seal
be affixed to the rear plate of the acre counter (securing
the battery compartment).
Figure 10
Password Change Prompt
34810