Great Plains Max Cover Verti-Till Ripper Operator Manual - Manual (Page 26)

5, 7, & 9 Shank
596-098M 8/6/07
24
Operating Instructions
This section covers general operating proce-
dures. Experience, machine familiarity and the
following information will lead to efficient opera-
tion and good working habits. Always operate
farm machinery with safety in mind.
Prestart Checklist
!
WARNING
Escaping fluid under pressure can have sufficient pres-
sure to penetrate the skin. Check all hydraulic lines
and fittings before applying pressure. Fluid escaping
from a very small hole can be almost invisible. Use pa-
per or cardboard, not body parts, and wear heavy
gloves to check for suspected leaks. If injured, seek
medical assistance from a doctor that is familiar with
this type of injury. Foreign fluids in the tissue must be
surgically removed within a few hours or gangrene
will result.
1. Carefully read “Important Safety Information,”
page 1.
2. Lubricate implement as indicated under “Lu-
brication,” page 33.
3. Check all tires for proper inflation. See “Ap-
pendix,” page 35.
4. Check all bolts, pins and fasteners. Torque as
shown in “Appendix,” page 35.
5. Check implement for worn or damaged parts.
Repair or replace parts before going to the
field.
6. Check hydraulic hoses, fittings and cylinders
for leaks. Repair or replace before going to
the field.