beautypg.com

Using this manual, Introduction, Using this manual introduction – Great Plains VT7300 Operator Manual User Manual

Page 4

background image

Using This Manual

Table of Contents ►

Great Plains Mfg., Inc.

Verti-Till VT5300-VT9225 Finishing Attachments 596-156M 6/30/2008

2

Using This Manual

For your safety and to help in developing a better
understanding of your equipment we highly
recommend that you read the operator sections of
this manual. Reading these sections not only
provides valuable training but also familiarizes you

with helpful information and its location. The parts
sections are for reference only and don’t require
cover to cover reading. After reviewing your
manual store it in a dry, easily accessible location
for future reference.

Introduction

This manual has been prepared to instruct you in
the safe and efficient operation of your Finishing
Attachment
. Read and follow all instructions and
safety precautions carefully.

The parts on your Finishing Attachment have
been specially designed and should only be
replaced with genuine Great Plains parts.
Therefore, should your Finishing Attachment
require replacement parts go to your Great
Plains
Dealer.

The right hand and left hand as used throughout
this manual is determined by facing in the
direction the machine will travel when in use
unless otherwise stated.

!

The SAFETY ALERT SYMBOL indicates that
there is a potential hazard to personal safety
involved and extra safety precautions must be
taken. When you see this symbol, be alert and
carefully read the message that follows it. In
addition to design and configuration of equipment;
hazard control and accident prevention are
dependent upon the awareness, concern,
prudence and proper training of personnel
involved in the operation, transport, maintenance
and storage of equipment.


Watch for the following safety notations through-
out your Operators Manual:

!

DANGER!

Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury. This
signal word is limited to the most extreme situations.

!

WARNING!

Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.

!

CAUTION!

Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate
injury. It may also be used to alert against unsafe
practices.

Note: Indicates a special point of information
which requires your attention.







!

!

!

!

This manual is related to the following products: