Great Plains NTA2000 Operator Manual - Manual (Page 6)

4 NTA 2000 148-561M 2/2/2006
Great Plains Mfg., Inc.
838-362C
Decal Pic-Is not a step
One on each side of Main frame.
Two decals total.
838-368C
Decal Pic-Pinch Point
Four on opener hinges.Four on coulter
hinges. One on lower step platform.
Nine decals total.
838-369C
Decal 25 KPH Transport
One on rear center of the
sub-frame.
Safety Decals
Your implement comes equipped with all safety decals in place.
They were designed to help you safely operate your implement.
1. Read and follow decal directions.
2. Keep all safety decals clean and legible.
3. Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
4. When ordering new parts or components, also request cor-
responding safety decals.
5. To install new decals:
a. Clean the area on which the decal is to be placed.
b. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.