Preparation and setup, Prior to going to the field checklist – Great Plains SS1700 Operator Manual User Manual

Page 15

06/14/2012

Table of Contents

Index

596-086M

Great Plains Manufacturing, Inc.

Table of Contents

Index

Preparation and Setup

This section helps you prepare your tractor and SS1300 &
SS1700 Sub-Soiler for use, and covers tasks that need to
be done seasonally, or when the tractor/Sub-Soiler config-
uration changes.

Before using the Sub-Soiler in the field, you must hitch it to
a suitable tractor, inspect systems and level the Sub-
Soiler. Before using the Sub-Soiler for the first time, and
periodically thereafter, certain adjustments and calibra-
tions are required.

Prior to Going to the Field Checklist

Complete this checklist before routine setup:
❑ Read and understand “Important Safety Informa-

tion” on page 1.

❑ Check that all working parts are moving freely, bolts

are tight, and cotter pins are spread.

❑ Make sure your tractor horsepower matches the

implement you are pulling. This is important so the
implement can do the best possible job.

❑ Check again for hydraulic leaks and watch that hoses

do not get pinched in hinges, wing stops, etc.

❑ Check that all grease fittings are in place and lubri-

cated. See “Lubrication” on page 23. The hubs will
come pre-greased and will not need greased at this
time.

❑ Check that all safety decals and reflectors are cor-