Great Plains 2000 Operator Manual - Manual (Page 8)

5
Important Safety Information
2012-03-27 12, 15 and 20 Foot Series Three-Point Drills 118-389M-A
Great Plains Mfg., Inc.
838-266C
Red Reflectors
Each end of walkboard; two decals total
838-265C
Amber Reflectors
Each end of drill; four decals total
818-055C
Slow Moving Vehicle Emblem
12097
Safety Decals
Your implement comes equipped with all safety decals in place.
They were designed to help you safely operate your implement.
1. Read and follow decal directions.
2. Keep all safety decals clean and legible.
3. Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
4. When ordering new parts or components, also request cor-
responding safety decals.
5. To install new decals:
a. Clean the area on which the decal is to be placed.
b. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
16490
12099