Great Plains FCP1000 Predelivery Manual - Manual (Page 3)

1
Important Safety Information
11/4/08 FCP1000 Three-Meter Drill and Hitch 148-693Q
Great Plains Mfg., Inc.
Important Safety Information
For your safety, thoroughly read “Important Safety Informa-
tion” and “Operating Instructions” in the operator’s manual
before proceeding.
Safety Notations
The SAFETY ALERT SYMBOL indicates that there is a poten-
tial hazard to personal safety involved and extra safety precau-
tions must be taken. When you see this symbol, be alert and
carefully read the message that follows it. In addition to design
and configuration of equipment, hazard control and accident
prevention are dependent upon the awareness, concern, pru-
dence and proper training of personnel involved in the opera-
tion, transport, maintenance and storage of equipment.
Watch for the following safety notations throughout this manu-
al.
!
DANGER!
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury. This signal word
is limited to the most extreme situations.
!
WARNING!
Indicates a potentially hazardous situation which, if not avoid-
ed, could result in death or serious injury.
!
CAUTION!
Indicates a potentially hazardous situation which, if not avoid-
ed, may result in minor or moderate injury. It may also be used
to alert against unsafe practices.
Safety Rules
Most accidents are the result of negligence, carelessness or
failure to follow safety precautions. Though your implement is
designed with many built-in safety features, safety precautions
are mandatory to prevent accidents.
!