Great Plains 2420 Operator Manual - Manual (Page 7)

5
Important Safety Information
5/15/06 2400, 2410 and 2420 Three-Point Drill 118-706M
Great Plains Mfg., Inc.
838-266C
Red Reflector
Reflector on both ends of
drill; two reflectors total
818-003C
Slow Moving Vehicle Sign
Safety Decals
Your implement comes equipped with all safety decals in place.
They were designed to help you safely operate your implement.
1. Read and follow decal directions.
2. Keep all safety decals clean and legible.
3. Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
4. When ordering new parts or components, also request cor-
responding safety decals.
5. To install new decals:
a. Clean the area on which the decal is to be placed.
b. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
17637
17638