Changhong Electric W270F8E - Manual (Page 22)

PAGE 19
Channel Selection
Press 【CH+】 / 【CH-】 on the panel or 【P+】 /【P-】on the remote control to change
the channels. If a channel number is in SKIP ON mode, the next channel will be displayed.
A maximum of three channel numbers can be input at one time on the remote control.
Volume Control
Press 【V+】/【V-】 to increase or decrease the volume. The range is 0-100.
The Volume menu will be automatically off if there is no operation in 4 seconds.
Mute
Press the【MUTE】on the remote control to turn On/Off the MUTE mode. Alternatively, press
【MUTE】, change the volume level to turn the MUTE off. The symbol will appear
at bottom-left corner of the screen as the Mute function is switched on. The
symbol is hidden when the menu operation is entered, but the feature is still valid. It appears
again when the menu operation is exited. When there is no valid signal input, the TV will be
mute (but no mute symbol) with a blue background.
Sound Mode Selection
Press【S.MODE】to select modes of Standard, News, Music or User.
The value of Standard, News, Music modes are default setting and cannot be adjusted. Only
User mode allows setting to the preferred mix.
Picture Mode Selection
Press【P.MODE】to select modes of Standard, Mild, Bright or User.
Information Display
Press 【 DISPLAY 】 to reveal the current signal source and its
corresponding information of Channel Number, Channel label, Color
System, Stereo/FM Mono and signal source of PIP. Characters in
green on the upper-right side display information for the main picture
in TV mode while characters in red displays the source information for
the sub-picture. Press again to exit.
Sleep Function
Press【SLEEP】to select the sleep time between
intervals of 10, 20, 30, 60, 90, 120, 180 minutes
or switch off the SLEEP function. A prompt will
appear when it is one minute from SLEEP. Press
any button to exit.
PIP:PC