Changhong Electric W270F8E - Manual (Page 15)

PAGE 12
1. Remove the LCD TV from the box and place it on a flat surface in a well-ventilated
location.
2. Connect the output terminal of RF cable to the corresponding TV input terminal.
3. Connect AV signal output (DVD or other equipments) to AV input terminal of the LCD TV
with AV connecter. Ensure that every AV signal cable is connected correctly to the
corresponding port.
4. Connect one side of PC, DVI terminals to the corresponding signal source terminal, and
connect the other side to the corresponding LCD TV terminal. Screw down the
thumbscrews on both sides to secure it. Affix the plug with care to avoid damage.
5. Connect the power cord to the AC outlet. Do ensure that other connected devices to the
same power source are switched off.
Caution:
Please refer the power range of this product to the back label on the back cover, do not
connect to any power supply, which is out of this range. When unplugging the power cord,
do not touch the metal part.
To Turn the TV On
1. When you turn on the power, the indicator in the front panel will blink till the TV displays
pictures.
2. In Standby mode, press 【 】on the remote control or front panel to enter to Power On
mode.
To Turn the TV Off
1. Press 【 】on the remote control or front panel to turn the TV transitorily off.
2. Unplug the power cord from the AC outlet to turn the TV off completely.
Caution: The TV will be automatically off when the power is suddenly off. The following may
occur if you did not unplug the power cord from the AC outlet:
a. The TV is in standby mode if it was in TV mode before
b. The TV will be automatically on if it was in other modes (such as AV/PC
mode)
Please do not turn on/off the TV set too often!
Please unplug the power cord from the AC outlet in time when the power is suddenly off!
Auto Off if No Signal Input
The TV will be auto off and enter into Standby mode after 15 minutes when there is no signal
(For instance, no program signal transmitted from the TV Station) input or no operation of
pressing buttons.
Indicator Light
Status Light Color Description
Working mode Off The TV works normally
Standby Red In Standby Mode
Timer On Green Timer On is valid.
Timer Off Green Timer Off is valid
Power Off No Indicator The TV is turned off
Sleep (PC, DVI) Yellow Sleep in PC/DVI mode
INSTALLATION
GENERAL OPERATION