Changhong Electric W270F8E - Manual (Page 21)

PAGE 18
to select the channel and press【V+】/【V-】to set
lock/unlock.
‹ A prompt appears when a locked channel is switched.
The password needs to be entered to watch the
program.
‹ In Lock All mode, press【OK】/【V+】to lock all of the
programs.
‹ In Clear All mode, press【OK】/【V+】to unlock all of
the programs.
Note: In child lock menu operation, each function cannot be activated until the correct
password is entered. If the password is forgotten, the default password of “1601” is still valid.
Using the PC Setting menu (for PC mode only)
1) Press【MENU】and then use【V+】/【V-】 to select the
desired field.
2) Press【P+】/【P-】to make the desired adjustment.
● Auto Tracking
To adjust automatically the picture’s clock,phase, H
Position and V Position to get the best visual effect.
● Phase
To adjust pictures’ sampling phase in PC mode
● Clock
To adjust pictures’ sampling frequency .
● H Position
To adjust picture’s position horizontally in PC mode.
● V Position
To adjust picture’s position vertically in PC mode.
Note:
In the menu, gray items means invalid to operate in the current mode.
Standby Mode
Press【 】on the TV panel/Remote Control, the LCD TV will store the current setup and
enter into standby mode with a red indicator light. To Power on the LCD TV, press the button
again.
Signal Switch
Press【AV】on the remote control to select the signal sources: TV, AV, AV1, AV2, YPbPr, PC
and DVI.
The upper-right corner of the screen will display the corresponding information of the signal
source.
OTHER FUNCTIONS INTRODUCTION