Great Plains 1006NT Operator Manual - Manual (Page 2)

706/1006 Seed Box Agitator 118-903M 9/13/04 Great Plains Mfg., Inc.
General Information
General Information
Great Plains Manufacturing, Inc. provides this publica-
tion “as is” without warranty of any kind, either
expressed or implied, while every precaution has been
taken in the preparation of this manual, Great Plains
Manufacturing, Inc. assumes no responsibility for errors
or omissions. Neither is any liability assumed for damag-
es resulting from the use of the information contained
herein. Great Plains Manufacturing, Inc. reserves the
right to revise and improve its products as it sees fit. This
publication describes the state of this product at the time
Important Notice
of its publication, and may not reflect the product at all
times in the future.
Printed in the United States of America.
For your convenience, record the serial and model num-
ber from your Drill, and the date-of-purchase of the Seed
Box Agitator in the Owner’s Information area below.
Have this information handy when calling a Great Plains
Authorized Dealer.
This Seed Box Agitator Attachment Operator’s Manual applies to the Drills listed below:
-706/1006 End Wheel No-Till Drill
Owner’s Information
Name: ______________________________________
Address _____________________________________
City _______________ State_____ Zip ____________
Phone _____________
Name of Dealership ___________________________
Dealer’s Name _______________________________
Address _____________________________________
City _______________ State_____ Zip_____________
Phone _____________
Serial Number_________________
Model Number ________________
Date Purchased _______________