Great Plains ADI334 Operator Manual - Manual (Page 6)

4
Important Safety Information
Models ADI334 and ADI345 Air Drill Implement 160-195M 5/11/05
Great Plains Mfg., Inc.
Safety Labels
Your implement comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
1. Read and follow label directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels. Order new labels
from your Great Plains dealer. Refer to this section for
proper label placement.
4. When ordering new parts or components, also request cor-
responding safety labels.
5. To install new labels:
a. Clean the area on which the label is to be placed.
b. Peel backing from label. Press firmly on surface,
being careful not to cause air bubbles under label.
838-265C
Amber Reflector (Two la-
bels–one each side of frame)
14356
838-265C
Amber Reflector (Both rear
castor wheels)
818-055C
Slow Moving Vehicle Label 16558
16558