Dymo LetraTag LT-100H - Manual (Page 4)

5
Make sure the labelmaker power is turned off before you
disconnect the power adapter from the main power source. Otherwise,
your most recent memory settings will be lost.
Inserting the Label Cassette
Your labelmaker comes with one label cassette. Visit www.dymo.com
for information about purchasing additional label cassettes.
To insert the label cassette
1. Press and release the label cassette
cover to open the label
compartment. See Figure 3.
Before using the labelmaker,
remove the protective cardboard
insert from label exit slot.
2. Insert the cassette with the label
positioned between the print head
and pinch roller. See Figure 4.
3. Press firmly until cassette clicks
into place.
4. Close the label cassette cover and
press to turn on the power.
Remove
cardboard insert
Figure 3
Figure 4