Dymo LetraTag LT-100H - Manual (Page 14)

15
To insert a symbol
1. Press , select Symbols, and press . The first row of
symbols shown in the table appears in the display.
2. Use the arrow keys to move to the desired symbol. The left and right
arrows move horizontally along a row of symbols. The up and down
arrow keys scroll vertically through the rows of symbols.
3. When you locate the symbol, press to add the symbol to your
label.
Adding International Characters
The labelmaker supports the extended Latin character set using RACE
technology. Similar to using a mobile phone keypad, when you hold
down a letter key for longer than one second, you will scroll through
variations on that letter. To insert the character, release the key when
the desired character appears.
For example, if French is selected as the language and you hold down
the letter a, you will see
and so on through all the variations
available. The character variations and the order in which the variations
appear depend on the language you have selected to use.
a а в ж