ClearOne MAX Wireless/MAXAttach Wireless - Manual (Page 19)

CARING FOR MAX WIRELESS PHONES
Follow all warnings and instructions marked on your MAX Wireless phone.
Unplug base unit and conferencing pod from the wall outlet before cleaning.
Use a damp cloth moistened with water to clean the outside of your conferencing pod or base unit and
power supply. Do not use liquid or aerosol cleaners.
ELECTRICAL CONSIDERATIONS
• Use only the power adapter that comes with your conferencing phone.
• Use only the battery pack that ships with your phone.
TROUBLESHOOTING
If you are having trouble with your MAX Wireless, it might be configured or connected incorrectly, or other equipment
might be causing the malfunction. Use the following checklist and the chart on the following page to troubleshoot
malfunctions.
Connection Checklist
• The MAX Wireless base unit is plugged into the proper volt electrical outlet and its power light is on.
• The battery pack in the pod section is fully charged and plugged in correctly.
• The telephone cord from the base unit is securely connected to the telephone wall jack.
• The equipment the other party is using should be of comparable quality to your MAX Wireless conferencing
phone. While MAX Wireless will work with lower-quality products, the quality of the conference call will be
impacted if the party you are conferencing with has poor quality equipment.
•
•
•
CHAPTER 5: MAINTENANCE
Chapter 5: Maintenance 15