ClearOne MAX IP/MAXAttach IP - Manual (Page 16)

Chapter 2: Getting Started 13
1 - Enable VAD
< vad_noise_match> - Defines the VAD Noise Matching algorithm.
Default Value: Level
Allowable Range:
None - Disabled
Level
g711a2
< vad_noise_order> - The VAD Noise Order.
Default Value: 5
Allowable Range: 0 - 10
< g711ulaw_priority> - The G.711 ulaw audio codec Priority.
Default Value: 255
Allowable Range: 1 (Lowest) to 255 (Highest)
< g711Alaw_priority> - The G.711 Alaw audio codec Priority.
Default Value: 254
Allowable Range: 1 (Lowest) to 255 (Highest)<
g729ab_priority> - The G.729 audio codec Priority.
Default Value: 250
Allowable Range: 1 (Lowest) to 255 (Highest)
< g7231_63_priority> - The G.723.1 low rate audio codec Priority.
Default Value: 245
Allowable Range: 1 (Lowest) to 255 (Highest)
< g7231_53_priority> - The G.723.1 low rate audio codec Priority.
Default Value: 240
Allowable Range: 1 (Lowest) to 255 (Highest)
< vad_thresh> - The Audio Threshhold level for the system.
Default Value: -20
Allowable Range: -50 (Lowest) to 255 (Highest)
< adaptive_vad> - Enable or Disable the Adaptive capabilities of the phone.
Default Value: 0
Allowable Range:
0 = Disable
1 = Enable
Phone Book: Add, Edit and Delete Number
See Phone Book: Add, Edit and Delete Number screen on page 25 for information on how to set this parameter
through the Web Portal.
<
speed_dial_0> through <speed_dial_9> - Speed Dial 0 through 9.
Default Value: Undefined
Allowable Range: Valid Phone Number [0-9]