ClearOne MAX IP/MAXAttach IP - Manual (Page 14)

Chapter 2: Getting Started 11
< use_sipauth> - Use SIP authentication credentials when registering with the SIP proxy.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: 0
Allowable Range:
0 - Disable
1 - Enable
< sip_username> - The user name with which the phone will authenticate with the SIP proxy if <use_sipauth> is
enabled.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: None
Allowable String Length: 49
< sip_password> - The password with which the phone will authenticate with the SIP proxy if <use_sipauth> is
enabled and < sip_username> is defined.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: None
Allowable String Length: 14<
outbound_sip_proxy_enable> - Enable call routing through Outbound SIP Proxy.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: 0
Allowable Range:
0 - Disable
1 - Enable
< outbound_sip_proxy> - Outbound SIP Proxy address. This can be a valid IP address, a hostname, or FQDN.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: 0.0.0.0
Allowable String Length: 79
< outbound_proxy_port> - The default port with which to communicate to the Outbound SIP Proxy.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: 5060
Allowable Port Range: 1 - 65535
< sip_transport> - The SIP Transport type.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: 0
Allowable Range:
0 - UDP
1 - TCP
< sip_udp_port> - The SIP UDP listen Port.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: 5060
Allowable port Range: 0 - 65535
< sip_tcp_port> - The SIP TCP listen Port.
Primary Proxy: Index=0, Secondary Proxy: Index=1
Default Value: 5060
Allowable Port Range: 0 - 65535