ClearOne MAX IP Response Point Quick Start - Manual (Page 3)

Page 3
Getting Started Guide
keyPaD Functions
Button name Function
Hook
Press to answer an incoming call. •
Press to activate the phone and receive a •
dial-tone.
Press again to disconnect an active call. •
While on a second line, press this button •
to disconnect the call (for example: when
listening to voicemail or a getting a busy
signal during a 3-way call).
Response Point
Press to access the Response Point
directory Automated Receptionist.
Redial
Press once to dial the last number called. •
Press and hold for two seconds to enter •
Program mode.
Conference
Press once during a call to place the first •
line on hold and receive a dial tone for a
second line.
Press again after the second call answers •
to connect a 3-way call.
Hold
Places the active call on hold. If you •
are not on a 3-way call, press to toggle
between lines.
If pressed during a 3-way call, both lines •
are placed on hold. A second press
releases all the active line(s).
Delete
Press once to delete the last digit entered. •
Press and hold to clear all digits. •
Press to exit Program mode. •
Volume up
Volume down
Adjusts volume while on a call. •
When not on a call, pressing these •
buttons will adjust ringer volume.
Mute
Press once to mute the microphones •
during a call. Press again to unmute.
If the phone is ringing, press once to mute •
the ringer for the inbound call.