ClearOne 800-156-201 Rev2.5 CHAT150 - Manual (Page 17)

14 Technical Support: 800.283.5936
CHAPtER 3: CONfIGURING tHE CHAt 150
CONFIGURING YOUR CHAT 150
this section describes how you configure your CHAt 150 for the specific devices you are connecting to. the CHAt
software contains a database of pre-configured device settings that allows you to instantly select and apply optimal
settings for supported devices.
> NOTE: from time to time, ClearOne adds additional devices to the database. to update your CHAt
software to include all currently supported devices, see the Update Firmware & Database section
later in this chapter.
If the specific device you are using with the CHAt 150 is not listed in the database, you can create a custom device by
following the instructions described later in this chapter.
DEvICE SETUP
to configure the CHAt 150 for your devices, perform the following steps:
Using the included USB cable, connect the CHAt 150 to your PC or laptop. the blue LEd indicators on the CHAt 1.
150 illuminate, indicating that the CHAt 150 is powered and ready for use.
Start the CHAt software by double-clicking the ClearOne CHAt icon on your desktop, or by launching the
2.
application from your PC’s Start menu.
the main screen of the CHAt software will be displayed.