ClearOne Writing StreamNet - Manual (Page 19)

6-1
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Chapter
6
Installing the Driver
After writing a driver, you must load it for use with the DigiLinX network. This
chapter provides step by step procedures for installing and running an example driver
for a Panamax
®
power conditioner. If you have any questions concerning DigiLinX
Dealer Setup, refer to the DigiLinX Dealer Setup Manual located on the Dealer
Documents page of the NetStreams website.
WARNING! You can only load drivers with DigiLinX Dealer Setup versions 1.5 or
higher.
1. Add a ControLinX configured for General Purpose Driver, Serial (see Figure 6-1).
Figure 6-1 Add a ControLinX