ClearOne BluePort NS-BP200 - Manual (Page 11)

i
nstAllAtion
G
uide
8
REcONNEcTiNg TO A PREviOuSly PAiREd BluEPORT
The BluePort will store the previous sixteen (16) devices that have connected. Previously paired
devices do not need to repeat pairing. Instead open the Bluetooth configuration page on your wire-
less source and reconnect to the room set with the Zone Name Selector rotary switch (SET ID). If
a stream is playing from one device and second device connects and starts a stream, the second
device’s stream will be played. Connecting and starting a stream is a manual process; it does not
automatically happen as a result of coming into proximity with a previously paired device.
RESTORiNg TO FAcTORy dEFAulTS
Restoring to factory defaults will remove all previous pairings. Any device previously paired will
need to be re-paired for that device to work with the BluePort.
To restore the BluePort to its factory default condition, press and hold the Reset button for at least
five (5) seconds. After five seconds the status LED will flutter, indicating that the BluePort is ready
for a factory reset. Release the Reset button. The BluePort will reset and return to the factory
defaults and is ready for use.