ClearOne VIEW Pro - D110 Manual - Manual (Page 8)

4 t
EChnICal
s
uPPort
: 800.283.5936
Installation
PHYSICAL CHARACTERISTICS
D
IMEnsIons
(E
xCluDIng
C
onnECtors
)
Width: 12.2 inches (310mm)
Length: 7.4 inches (188mm)
Height: 1.75 inch (44.4mm)
MOUNTING THE D110
The VIEW Pro Decoder includes a Wall Mount Kit (910-0002-002) with surface-mount ears that
attach to facilitate mounting on top of a surface, under a surface or on a wall. When mounted, all
the I/O connections on the D110 are accessible from the back of the unit. An optional rack mount
kit (910-0002-001) is available with longer ears fitting a standard rack. The rack mount ears can be
reversed so the VIEW Pro unit can be mounted either face forward or connections forward.
Surface Mounting
Rack Mounting
Surface Mounting
Rack Mounting
An optional VESA mount bracket Kit ( 910-0002-006) is available for applications where an decoder
must be located on a VESA mount.
» NOTE: The VESA adapter does not attach the decoder to the back of a monitor, but
allows the decoder to be attached to a separate VESA mount.
The VESA mount bracket kit contains a wall bracket that the VESA bracket fits for a wall mount
option.
VESA Bracket
Wall Bracket
(Mount to stud or
other solid surface)
Unit with VESA Bracket
hangs on Wall Bracket