ClearOne VIEW Pro - D110 Manual - Manual (Page 5)

I
nstallatIon
M
anual
1
Introduction
PRODUCT OVERVIEW
streamnet aVoIP™ V
IDEo
P
latforM
The StreamNet IP platform is designed to send high-quality audio and video over a TCP/IP network
(AVoIP™). An encoder, such as a VIEW Pro E120, takes digital video and audio from a source
device, such as a receiver, cable box or DVR, and makes the source available anywhere on the
StreamNet network. A decoder, such as the VIEW Pro D110, takes the combined video and audio
stream and decodes it. The D110 then sends the video and audio to a display such as a HDTV or
projector and sound system.
D
EVICE
a
PPlICatIon
The D110 is a high-definition, Internet Protocol, Compressed Audio/Video decoder. The D110
connects to a TCP/IP network using a gigabit Ethernet connection. Used in connection with the
E120, the D110 decoder is designed to be installed at the location of the target video display.
Installation should be done by a qualified Dealer Service representative. Please consult the DigiLinX
Installation Manual for device use in system configuration.
I
nCluDED WIth
Y
our
VIEW P
ro
D
ECoDEr
The following items are included with the VIEW Pro Decoder:
Item Description
910-0001-001 VIEW Pro Decoder D110
Power Supply, Power Cord
910-0002-001 Wall Mount Kit for VIEW Pro Encoder E120, Decoder D110
• Bracket 1Ru Rack/Wall Mount
• 2X - Screw, M3 x 6mm, Pan-head, Phillips, Thread Locking, Black
• 2X - Bracket, 19V PSU Wall mount
QSG-0010-001 VIEW PRO Encoder/Decoder Quick Start Guide