ClearOne VIEW Pro - D110 Manual - Manual (Page 11)

I
nstallatIon
M
anual
7
Software Setup of the D110
The D110 is setup for use in the commercial or residential network using the StreamNet Dealer
Setup program and the accompanying StreamNet Dealer Setup manual. StreamNet Dealer Setup
is a PC-based program that allows you to configure devices so that they can communicate across
a StreamNet network. Phases of the software setup include:
• Opening the existing project
• Add the new device
• Configuring the device with system-specific information regarding Display Outputs, Controls,
IP and GPIO
• Saving the project
• Sending the configuration files to the server
These steps involved in these processes are detailed in the DigiLinX Dealer Setup manual available
for viewing or download at www.ClearOne.com.
Verify the configuration information on the tabs for the D110 decoder as shown in the following
screen examples:
LUA FILE
Control options for VIEW Pro devices using StreamNet Dealer Setup is facilitated but the .lua file
found in the C:\Program Files x86)\ClearOne\StreamNet Application Suite\viewPro\drivers directory
VIEW Pro has two DB9 Serial ports available on both Encoder and Decoder.
Information about editing and using .lua files for RS-232 control is included in the VIEW Pro RS-232
Control section later in this manual.