beautypg.com

Specifications, Servicing, Maintenance procedures – Chicago Electric 66619 User Manual

Page 14

background image

Page 14

For technical questions, please call 1-800-444-3353.

SKU 66619

SPEcIFIcATIoNS

Engine Type

Air Cooled, 2-Stroke, Single Cylinder,

Horizontal Shaft.

Engine Starter Type

Recoil Starter

Engine Power Rating

2.0 H.P.

Displacement

63cc

Required Fuel Mixture (50:1)

50 Parts 89+ Octane Unleaded

Gasoline Mixed with 1 Part 2-Cycle Oil

Fuel Tank Capacity

1.1 Gallons

Spark Plug Gap

0.028”~0.031”

Spark Plug Arrestor Present

No

Engine Run Time

with Full Tank at

50% Load

Approximately 5 Hours

AC Receptacle

Type

NEMA120 volt / 3-prong, grounded (Qty. 1)

60 Hz with 7 AMP Circuit Breaker

Generator

Rated Output

Power

800 Watts

Generator

Maximum

Output Power

900 Watts

Accessories

Spark Plug Wrench (Qty. 1)

SERvIcING

To PREvENT

SERIoUS INjURY

FRoM AccIDENTAl STARTING:

Turn the Power Switch of the

Engine to its “oFF” position, wait

for the Engine to cool, and

remove the Spark Plug wire

before performing any

inspection, maintenance, or

cleaning procedures.

To PREvENT

SERIoUS INjURY

FRoM EqUIPMENT FAIlURE:

Do not use damaged equipment.

If abnormal noise, vibration, or

excess smoking occurs, have the

problem corrected before further

use.

Maintenance Procedures

Many maintenance procedures,

including those not detailed in this

manual, will need to be performed

by a qualified technician for

safety. If you have any doubts

about your ability to safely service

the equipment or Engine, have a

qualified technician service the

equipment instead.

Note: Warranty is void if proper maintenance

and servicing procedures are not

followed.

Air Filter Element Maintenance:

A

b

c D

E

F

FIGURE N

1. Wipe off the Air Cleaner Cover. Then

remove the Cover.

(See Figure N.)

Remove the Air Filter Element.

2.

Wash the Air Filter Element in warm

3.

water and mild detergent several times.

Rinse. Squeeze out excess water and

allow it to dry completely. Soak the Filter

in lightweight oil briefly, then squeeze out

the excess oil.
Install the new Air Filter Element or the

4.

cleaned Filter. Secure the Air Cleaner

Cover before use.

REv 09k