Installation instructions, Step 7 – Quoizel GLN8410IB Galen User Manual
Page 4
INSTALLATION INSTRUCTIONS
4 OF 4
EXTERIOR GRADE
CAULK
MOUNTING BALL
STEP 7:
a. Refer to the following information for caulking instructions:
With the OUTDOOR FIXTURE properly installed in accordance with supplied Assembly/installation instructions,
proceed with caulking instructions below.
Note: Be sure EXTERIOR WALL SURFACE and FIXTURE BACKPLATE are free to dirt to caulking. Using
EXTERIOR GRADE CAULK, start on one side of FIXTURE BACKPLATE and follow contour, were the FIXTURE
BACKPLATE meets the EXTERIOR WALL SURFACE upward. Proceed to caulk over top of backplate and down
other side.
to ensure proper moisture drainage.
DO NOT CAULK BOTTOM OF FIXTURE BACKPLATE
For assemble the MOUNTING BALLS, please note that
you are required to apply a small amount of Silicone
sealer to the threaded side of the MOUNTING BALLS
and then install them onto the MOUNTING SCREWS.
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
EXTERIOR GRADE
CAULK
OUTDOOR
FIXTURE BACKPLATE
EXTERIOR WALL SURFACE
STYLE NUMBER: GLN8409IB,GLN8410IB