Quoizel GLN8410IB Galen - Manual (Page 3)

INSTALLATION INSTRUCTIONS
3 OF 4
STEP 3:
a. Screw the Mounting Screws into the Crossbar place
the Lock Washers over the Mounting Screws and
thread the Hex Nuts onto the Mounting Screws as
shown
Secure the position of the Mounting Screws by
tightening the Hex Nuts against the Crossbar
b. Secure the Crossbar to the Outlet Box with Outlet Box
Screws
,
.
.
.
Outlet Box
Crossbar
Mounting Screw
Hex Nut
Outlet Box Screw
Lock Washer
WHITE WIRE
BLACK (OR RED) WIRE
GROUND WIRE
WHITE WIRE
BLACK WIRE
GROUND WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSE
FROM FIXTURE
FROM FIXTURE
FROM FIXTURE
STEP 4:
a. Connect the House Ground Wire to the Fixture Ground
Wire.
b. Connect the House White Wire to the Fixture Supply
Wire (White Wire).
c. Connect the House Black (or Red) Wire to the Fixture
Supply Wire (Black Wire).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the
Outlet Box.
Use Wire Connectors (not supplied) to connect the
wires.
STEP 5:
a. Place the Backplate over the Mounting Screws and
secure with the Mounting Balls. Hand-tighten until
snug.
Mounting Screw
Backplate
Outlet Box
Mounting Ball
STEP 6
:
a. Install the correct Bulb referring to fixture markings and/or labels for maximum wattage.
STYLE NUMBER: GLN8409IB,GLN8410IB