Quoizel COR8414K Cooper - Manual (Page 3)

INSTALLATION INSTRUCTIONS
3 OF 4
STYLE NUMBER: COR8414K
STEP 4:
a. Place the Backplate over the Outlet Box as shown.
Secure by threading the Lock Ball onto the Nipple.
Hand-tighten until snug.
STEP 5:
a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.
Lock Ball
Outlet Box
Nipple
Backplate
EXTERIOR GRADE
CAULK
MOUNTING BALL
STEP 6:
a. Refer to the following information for caulking instructions:
With the OUTDOOR FIXTURE properly installed in accordance with supplied Assembly/installation instructions,
proceed with caulking instructions below.
Note: Be sure EXTERIOR WALL SURFACE and FIXTURE BACKPLATE are free to dirt to caulking. Using
EXTERIOR GRADE CAULK, start on one side of FIXTURE BACKPLATE and follow contour, were the FIXTURE
BACKPLATE meets the EXTERIOR WALL SURFACE upward. Proceed to caulk over top of backplate and down
other side.
to ensure proper moisture drainage.
DO NOT CAULK BOTTOM OF FIXTURE BACKPLATE
For assemble the MOUNTING BALLS, please note that
you are required to apply a small amount of Silicone
sealer to the threaded side of the MOUNTING BALLS
and then install them onto the MOUNTING SCREWS.