Quoizel COR8414K Cooper - Manual (Page 2)

2 OF 4
STYLE NUMBER: COR8414K
INSTALLATION INSTRUCTIONS
STEP 1:
a. Secure the Crossbar to the Outlet Box with Outlet Box
Screws
.
WHITE OR RIBBED
BLACK (OR RED) WIRE
GROUND WIRE
WHITE OR RIBBED
BLACK OR SMOOTH
GROUND WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSE
FROM FIXTURE
FROM FIXTURE
FROM FIXTURE
STEP 3:
a. Connect the House Ground Wire to the Fixture Ground
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side).
c. Connect the House Black (or Red) Wire to the Fixture
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the
Outlet Box.
Use Wire Connectors (not supplied) to connect the
wires.
STEP 2:
a. Thread the Hex Nut onto one end of the Nipple.
b. Place the Lock Washer over the Hex Nut end of the
Nipple and then thread the Nipple into the center lock
hole of the Crossbar.
c. Using pliers, thread the Hex Nut against the Crossbar
and hand-tighten until snug.
Pliers is required for this step.
Outlet Box
Crossbar
Outlet Box Screw
Crossbar
Lock Washer
Hex Nut
Nipple