Casio PS-20 - Manual (Page 25)

E-23
Sending Memory Playback Data
You can send memory playback as MIDI data.
The send channel used depends on the keyboard channel
setting, as shown in the table below.
* When you have Channel 16 set as the keyboard channel,
memory playback is send over Channel 1.
❚ NOTE
• Pedal effect data recorded to memory is applied to play back
from memory, and does not affect your performance on the
keyboard. Likewise, pedal operations on the digital piano are
applied to the keyboard only, and not to play back from the
memory.
Keyboard Play Keyboard Channel
Memory Keyboard Channel + 1*
C 4 A 6 (black key) B 7
424A-E-025A
Simultaneous Receive Over
Multiple Channels (Multi-Timbre)
The Multi-Timbre mode makes it possible to assign the digital
piano’s built-in tones to MIDI channels 1 through 16. Then
you can simultaneously sound multiple channels to play from
a commercially available multi-track sequencer.
❚ NOTE
• See “Assigning Tones to Individual Channels” on this page for
details on assigning tones to each channel.
• Up to 16 channels can be received simultaneously (Channel 1
through channel 16).
• The number of channels to be received simultaneously cannot
be predetermined. If it becomes necessary to cancel a channel,
the cancel operation must be performed on the sending side.
Setting the Keyboard Channel
This parameter sets the channel for sending MIDI messages
to an external device. You can set any MIDI channel in the
range of 1 to 16 as the keyboard channel.
To set the Keyboard Channel
1.
While still holding down the CONTROL button,
select the Keyboard channel by pressing one of
the keyboard keys illustrated below.
Example: Channel 8
• A note does not sound when you press a keyboard
key while holding down CONTROL.
❚ NOTE
• The Keyboard Channel is automatically set to 1 whenever you
turn on the digital piano power.
Assigning Tones to Individual Channels
You can assign tones to channels using a Program Change
message sent from a connected MIDI device. You cannot
change the tone assigned to each channel from the digital
piano.
❚ NOTE
• The GRAND PIANO 1 tone is automatically assigned to all
channels whenever you turn on the digital piano power.
PS20_E_22-25.p65 02.2.4, 7:12 PM Page 23 Adobe PageMaker 6.5J/PPC