Assembly instructions, Step 2, Step 3 – Quoizel KY8701IB Kyle User Manual
Page 2: Step 4, Step 5
ASSEMBLY INSTRUCTIONS
2 OF 2
STYLE NUMBER KY8701IB
:
Shade Holder
Shade
Crossbar
Mounting Screw
Backplate
Mounting Ball
WHITE OR RIBBED
BLACK OR RED WIRE
(
)
FROM HOUSE
GROUND WIRE
GROUND WIRE
FROM HOUSE
FROM FIXTURE
WHITE OR RIBBED
FROM FIXTURE
FROM HOUSE
FROM FIXTURE
BLACK OR SMOOTH
STEP 2
:
*
(
)
.
.
.
(
)
(
)
.
(
)
(
).
.
.
Use Wire Connectors not supplied to connect the
wires
a
Connect the House Ground Wire to the Fixture Ground
Wire.
b
Connect the House White
or Ribbed
Wire to the
Fixture Supply Wire White or Ribbed Side .
c Connect the House Black or Red
Wire to the Fixture
Supply Wire Black or Smooth Side
d Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet Box
STEP 3
:
.
a
Place Backplate onto Outlet Box aligning 2 holes in the
Backplate with 2 Mounting screws threaded on the
Crossbar and secure it against wall with Mounting Balls
.
STEP 4
:
a
Place the Shade setting inside of the Shade Holder as
shown
.
.
STEP 5 :
a
Install the correct bulb referring to fixture markings and or labels for maximum wattage
.
/
.
.
.
.
Your installation is completed now
Restore electricity
Retain this sheet for future reference