Quoizel KD8701MM Kendra User Manual
Package contents, Warnings and cautions, Preparation installation instructions
PACKAGE CONTENTS
INSTRUCTION SHEET IS KD8701
-
STYLE NUMBER KD8701MM
:
ISSUED 07-2008
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
Part
A
E
C
G
H
I
J
B
F
D
Description
Lock Washer
Hex Nut (for Mounting Screw)
Shade
Candle Cover
Crystal Pendant
Fixture Body
Crossbar
Green Ground Screw
Mounting Screw
Mounting Ball
Quantity
1pc
2pcs
2pcs
1pc
2pcs
2pcs
1pc
1pc
1pc
1pc
A
B
C
D
E
F
G
H
I
J
WARNINGS AND CAUTIONS
!
PREPARATION
INSTALLATION INSTRUCTIONS
WARNING:
● Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by
switching off the circuit breaker or removing the fuse.
CAUTIONS:
● These instructions are provided for your safety. It is very important that they are read completely before the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had sufficient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
● Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time: 10
20 minutes
● Tools Required for Assembly (not included): Flathead screwdriver Phillips screwdriver, pliers, electrical
tape, wire cutters, safety glasses &1, 60 Watt, Type B Candelabra Base Bulb.
● Helpful Tools (not included): Wire Strippers.
-
,
-
1 OF 2
STEP 1:
a Screw the Mounting Screws into the Crossbar
place the Lock Washers over the Mounting Screws
and thread the Hex Nuts onto the Mounting Screws
as shown
Secure the position of the Mounting
Screws by tightening the Hex Nuts against the
Crossbar
b
Secure the Crossbar to the Outlet Box with Outlet
Box Screws
.
,
.
.
.
.
Outlet Box
Crossbar
Mounting Screw
Hex Nut
Outlet Box Screw
Lock Washer
Revised 2009-03-12