Quoizel UST1716WT Union Station - Manual (Page 2)

2of2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2014 QuoizelInc. May2014
UST1716WT
PART NUMBER
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2 "
REPLACEMENT PART DESCRIPTION REQ. NO.
1
FINISH: WESTERN BRONZE
Figure 6
STEP 6 Install Bulb -
A. This fixture uses standard bulbs 60W (supplied) with standard
screw base. Maximum 100 watts. Insert bulb and screw snugly into
place.
Your fixture is now assembled and ready to use. Enjoy!
Bulb
Mounting
Screw
A
AA
Mounting Ball
Figure 5
STEP 5 Install Fixture Body -
A. Carefully tuck all wires into the
outlet box and position the Ceiling
Canopy (A) over the outlet box.
Align the holes in the Ceiling
Canopy (A) with the mounting
screws, then attach the Ceiling
Canopy (A) using the previously
removed mounting balls. Hand
tighten until snug.
(3) Medium Base
Decorative Filament
60W bulbs (provided),
Maximum 100W.
the Outlet Box to Ground Wire from fixture.
C. Twist connectors until wires are tightly joined together.
D. Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
5” Dia.
6”
11.5”
16” Dia.
16.5” Dia.