Quoizel GF1717AN Griffin - Manual (Page 3)

INSTALLATION INSTRUCTIONS
STYLE NUMBER GF1717AN,GF1717PN :
STEP 5
:
.
a Place the Ceiling Canopy onto Outlet Box aligning 2
holes in the Ceiling Canopy with 2 Mounting screws
threaded on the Crossbar and secure it against wall
with Mounting Balls
.
STEP 6
:
a Screw the short nipple end of the Stem Assembly into the
Hex Coupling underside of the Socket Cluster. Hand
tighten until snug.
.
STEP 7
:
a. Pass the following components over the end of the Stem
Assembly in turn:
Flat Washer, Plastic Washer, Shade, Plastic Washer and
Flat Washer.
b. Thread the Hex Nut onto the end of the Stem Assembly and
tighten gently until snug to secure the above parts
together.
3 OF 3
Mounting Screw
Ceiling Canopy
Mounting Ball
Outlet Box
Stem Assembly
Socket Cluster
Hex Coupling
Stem Assembly
Flat Washer
Plastic Washer
Plastic Washer
Flat Washer
Hex Nut
Shade
STEP 8 :
a. Pass the Cap over the end of the Stem and secure with the
Finial. Hand tighten until snug.
Stem
Cap
Finial
STEP 9 :
a Install correct bulbs referring to fixture markings and or labels for maximum wattage
. / .
. . .
Your installation is completed now Restore electricity Retain this sheet for future reference