Quoizel VLA1618C Valla - Manual (Page 4)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
4of4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2013 QuoizelInc. November2013
Assembly Instruction Sheet #IS-VLA1618C
For Style VLA1618C
STEP 6
- Install Crystal to Fixture
A. Place the Crystal Assembly (G) over the Fixture Body
(C), secure by threading the Lock Ball (H) onto the
Nipple on the bottom of Fixture Body (C), hand tighten
until sung.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 7
STEP 4
- Install Bulb
A. This fixture uses Clear G4 Xenon Bulbs. Maximum 20
watts.
B. Insert bulb and seat properly into place.
Do not touch the bulb with bare hands use
a cloth or glove.
IMPORTANT:
Figure 5
Bulb
Socket
Lock Ball
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.
STEP 3
- Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy over the Mounting Screws
and secure with Mounting Balls (B). Hand tighten until
snug.
Figure 4
Mounting
Screw
Crossbar
Ceiling
Canopy
Mounting
Ball
Crystal
Assembly
Fixture
Body
Nipple
Figure 6
STEP 5 Tighten the Crystal String
-
A. Tighten the Allen Screw on the crystal frame with the
Inner Hexagon Spanner (J) if you find any crystal
strings are loose.
Allen Screw
Crystal Assembly
Inner Hexagon Spanner