Quoizel MNR1615BN Manor - Manual (Page 3)

INSTALLATION INSTRUCTIONS
3 OF 4
Ceiling Canopy Nipple
Flat Washer Lock Washer
Hex Coupling
STEP 4:
a. Position the Ceiling Canopy to the ceiling by passing the
Nipple through the center hole.
b. Slip on the Flat Washer and the Lock Washer and then
thread the Hex Coupling to the bottom end of the Nipple.
Snug down assembly until the Ceiling Canopy is flush
against the ceiling.
* Be sure that there are no trapped or pinched wires along
the edge of the pan.
STEP 5 :
a. Thread the Hex Nut end of the Nipple with Hex Nut into the
Hex Coupling underside of the ceiling canopy. Using pliers,
thread the Hex Nut against the Hex Coupling and hand
tighten until snug.
STEP 6 :
a. Install the correct bulb referring to fixture markings and/or
labels for maximum wattage.
STEP 7 :
a. Pass the center hole on the bottom of the Shade over the
end of the Nipple, attach the Shade onto the bottom of the
Ceiling Canopy. Thread the Thumb Nut onto the Nipple to
secure the Shade. Hand tighten until snug.
Bulb
STYLE NUMBER: MNR1615XX
Nipple with Hex Nut
Hex Coupling
Nipple
Shade
Thumb Nut