Quoizel EMP1623C Empress - Manual (Page 5)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
5of8
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2014 QuoizelInc.
Assembly Instruction Sheet #IS-EMP1623C
For Style EMP1623C
March2014
Figure 4
STEP 3 Make Wire Connections
-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 3
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply Ground wire from fixture
Figure 5
STEP 5 Remove Protective Film
-
A. Remove the Protective Film on the ceiling canopy.
Figure 6
Protective
Film
Inner
Backplate
Mounting
Screw
Mounting
Balls
Fixture Body
STEP 4 Attach Fixture Body to Mounting
Screw
-
A. Place the Fixture Body (G) over the Mounting Screws
and secure with Mounting Balls (J). Hand tighten until
snug.