Quoizel MY1404ML Monterey Mosaic - Manual (Page 3)

3 OF 3
INSTALLATION INSTRUCTIONS
STYLE NUMBER: MY1404ML
STEP 4:
a. Connect the House Ground Wire to the Fixture Ground
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side).
c. Connect the House Black (or Red) Wire to the Fixture
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the
Outlet Box.
WHITE OR RIBBED
BLACK (OR RED) WIRE
GROUND WIRE
WHITE OR RIBBED
BLACK OR SMOOTH
GROUND WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSE
FROM FIXTURE
FROM FIXTURE
FROM FIXTURE
Use Wire Connectors (not supplied) to connect the
wires.
STEP 5:
a. Screw the Hex Nut onto the end of the Nipple and
adjust to proper location for Lock Washer, Ceiling
Canopy, Knurled Nut and Mounting Ball.
b. Pass the Lock Washer and the Ceiling Canopy over the
end of the Nipple and secure with the Knurled Nut.
Hand-tighten until snug.
c. Thread the Finial onto the end of the Nipple and hand
tighten until snug.
STEP 6:
a. Place the Shade over the Socket as shown. Using the
Socket Collar Tool, thread the Socket Collar onto the
Socket to secure the Shade. Hand-tighten until snug.
STEP 7:
a. Install correct Bulbs referring to fixture markings and/or labels for maximum wattage.
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
Nipple
Hex Nut
Lock Washer
Ceiling Canopy
Knurled Nut
Socket
Shade
Socket Collar Tool
Socket Collar
Mounting Ball