Quoizel MY1404ML Monterey Mosaic - Manual (Page 2)

INSTALLATION INSTRUCTIONS
STEP 1:
a. Secure the Crossbar to the Outlet Box with Outlet Box
Screws. Hand-tighten until snug.
STYLE NUMBER: MY1404ML
Crossbar
Outlet Box
Outlet Box Screw
STEP 2:
a. Thread one Hex Nut onto top end of the Nipple.
b. Place one Lock Washer over the top end of the Nipple
and then thread the Nipple into the center lock hole of
the Crossbar.
c. Using pliers, thread the Hex Nut against the Crossbar
and hand-tighten until snug.
Pliers is required on this step.
Crossbar
Lock Washer
Hex Nut
Nipple
STEP 3:
a.
.
.
Install the Lanyard.
The purpose of the lanyard is to provide the installer a
means to support the fixture from the junction box while
connecting the electrical wires. This enables the fixture
to hang from the junction box and your hands are free
to make the wire connections.
Turn the Button Stop so it may be inserted into the
Crossbar slot. Make sure the Button Stop is completely
inside the Crossbar. Slowly release the fixture to make
sure it is supported by the Button Stop.
b Proceed to Step 4 for the wiring steps.
c Once you are complete with the wiring there is nothing
to do with Lanyard. The Lanyard will push into the
Outlet Box when the fixture is placed for final mounting.
Crossbar
Slot
Outlet Box
Ceiling Canopy
Lanyard
Botton Stop
2 OF 3